In detail

All our tips for renovating a wooden chair

All our tips for renovating a wooden chair

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Renovating a wooden chair: restoring the structure

Remove the seat by wood of your chair, keep only the structure. You can start with sand evenly the chair structure with sandpaper to expose the wood and remove any traces of paint or varnish. You can help yourself with portable power sander with fine tip to reach the most delicate areas. Then wipe the chair frame with a dry cloth to remove the dust.

If the legs of your chair are damaged by time (the wood crumbles in this area), you can fill them with a mastic. You can also choose to strengthen them using a special hardener.

Also be aware that you can use a wood stain remover to remove stains that may be present on the wood of your chair.

Renovate a wooden chair: customize the structure

Now that the structure of your wooden chair is in its raw state, you can choose which finish bring him. Wood color stain for a traditional look, or even acrylic paint which offers you an unlimited choice of colors. The finish will depend on the number of coats. It is also possible to give a patinated appearance to the structure of your chair thanks to a wide range of products.

Renovating a wooden chair: varnishing the structure

So that the structure of your chair retains its new shine, it is best to varnish. The varnish, mat or satin depending on the desired finish, will protect it from future aggressions. Have a first coat of varnish following the direction of the grain of the wood, then let it dry for two hours. Lightly sand the wood and dust. Then apply the second coat of varnish in the same way. Finally let it dry for at least two hours.

Renovating a wooden chair: repairing the seat

Let's go towooden seat from your chair. It too is just waiting to be restored. Start by taking his imprint using a large sheet of kraft paper and a drawing pencil. Copy the imprint on a wood board. Cut out the shape of the seat with a jigsaw, sand by hand and with sandpaper the edges of the cut board, then dust it off. Go to the personalization stage, then to the varnish stage, as for the structure (above mentioned).

You prefer to make a fabric seat ? Is your wooden board cut out (as above)? Let's go ! Place the wooden board on a large square of foam. Cut the foam following the shape of the board using large scissors. Repeat two to three times to obtain the number of layers of foam necessary for your comfort. It is done ? Continue with the cutting of the fabric you have chosen in the format of the seat. The simplest technique is to cut a square of fabric by adding 10 cm on each side of the seat (therefore 20 cm in total over the length, and 20 cm in total over the width). Then superimpose the wooden board, then the foam, then the fabric. Center the fabric well, and take care to place the patterns (if any) in the desired direction. Turn everything over, then fix the fabric on the wooden board using a stapler (sides, then corners). Attention, take care not to move the fabric and to tighten it well between each staple stroke. You just have to cut the fabric at the holes that will accommodate the screws to fix the seat to the structure of your chair.

Renovating a wooden chair: putting it all together

Has the structure and seat of your chair been restored? Put it all together by fixing the seat to the structure of the chair using screws. It's over, your wooden chair is like new!

Renovating a wooden chair: the precautions to take

Before you decide to restore your wooden chair, know that it is more prudent to ensure its stability and condition. If the wood is too worm-eaten or the chair is loose, the repairs to be made may be expensive and should be carried out by a professional. This is also true if your wooden chair is vintage. So have a look!